X-Ray Flaw Detector

160KV High frequency constant potential X-ray machine for DR

2022-02-25

Brief description: 

Following the strict manufacturing standards of the Power Tree brand, PTS series high-frequency X-ray machines select high-quality metal-ceramic ray tubes matched with Power Tree high-voltage power supply and cooling products to provide customers with a continuous working X-ray machine of up to 6000kW. It can provide a stable X-ray source for non-destructive testing, industrial CT, biological irradiation, thickness measurement, scientific research and other applications. The modulator of the PTS ray machine adopts high-frequency double closed-loop control, no need to increase the auxiliary voltage stabilized power supply, and can overcome the interference and fluctuation of the external network voltage through its own rectified power supply, and the imaging is stable. 


It is not disturbed by the fluctuation of the power supply on site, and fully guarantees the stability of the radiation output dose. The bipolar power supply is controlled by dual modulators, which fully overcomes the problem of voltage imbalance between bipolars caused by single modulator control and prolongs the service life of the ray tube. The whole machine has powerful protection functions, with kV and mA follow-up protection. For any kV and mA value, the protection value can be set at 1%-5%, and a slight discharge can achieve microsecond level protection.



1. System composition


image.png

    X-ray tube                 H.V cable                 H.V power supply                   Controller                      Cooler


System Configuration

 

                                                    X-ray Tube 

                                                 

X Ray Tube.jpg


Tube Voltage: 0-160kV

Power: 800W/1800W

Focus Size: EN12543 d=0.4mm/d=1.0mm

Radiation Angle: 40°

Cooling Flow: 4L/min

   High Frequency and High Voltage Generator


                                      

High Frequency and High Voltage Generator.jpg


Cathode + Anode

Working Frequency: 40kHz

Maximum Power: 6000W

Ripple: 0.5%

Insulation Method: oil insulation

Maximum Current: 30mA

Power Supply: 230VAC(±10%), 50Hz

Operating Environment: 0-45℃, 60-90% RH no condensation

High Voltage cable: 7m

Power Cable: 10m

                                               Controller

           

                              

Control.jpg


Control Cable: 10m

Operation Interface: Chinese and English switching

Focus: Large/small focus switch (in case of dual focus)

Voltage Setting and Control: 0~160kV, step size 0.1kV, accuracy ±0.1%

Current Setting and Control: 0.5~6mA/0.5~5mA, step 0.1mA, accuracy ±0.1%

Exposure Time and Control: 0~99min

Automatic Training Machine: automatically select training program according to the downtime (Optional)

Exposure Parameter Memory: able to record the exposure parameters and recall them according to the record

Fault Protection and Alarm: over voltage, overcurrent, undervoltage, undercurrent, Arc (sparking) protection, high frequency inverter failure,cooler failure, interlock, over temperature failure

                                                     Cooler

                                          

                                           Cooler.jpg


Cooling Power: 3000W

Cooling Medium: water (air cooling)

Flow Rate: 4L/min

Power Supply: AC 220V, 300W

Size: 705X535X730mm

Weight: 50kg

Output Connector: quick connector 1/4"

Flow Switch: 4l/min is not adjustable, below 4l/min, the signal is open

Thermostat: The start and stop temperature of refrigeration is adjustable, the factory setting is 50℃ alarm for oil cooler

Shutdown Delay Cycle: adjustable, factory setting 3min

Tubing: 2 sets, 7m

Working Field Pictures

working field.png

CONTACT US

E-mail: zhongyi@zhongyi-ndt.com

Tel: +86- 415-6135926

Fax : +86- 415-6133688

Work Time: 9AM--5PM (GMT+8)

Address: No. 5 Tong Xing Rd ,Zhen An Distr.

Dandong, 118011 China

MOBILE WEBSITE
Scan the QR code below