PD-H1 Printable Leeb Hardness Tester
Parameters:
• Hardness Scales: HL, HRC, HRB, HV, HB, HS
• Measurable Material: Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, aluminum casting alloy, copper zinc alloy(brass), copper tin alloy(bronze), fine copper
• Optional Impact Device: D / C / DC / D+15 / DL / G
• Standard Impact Device: impact device of Type D
• General calibration mode used for error correction of system error and impact device aging error
• Independent calibration mode used for error correction of each hardness scale
• Alarm mode used for over limit alarming
• Able to communicate with PC, and host Software upgradable
• Test Precision: ±6HL, ±1HRC, ±4HB
• Upper / Lower Limits Setting: 170~960HLD
• Screen Display: 128*64 dot matrix LCD, backlight and adjustable contrast
• Measuring Direction: 360° (down, inclined down, level,inclined up and up)
• Data Memory: 200*32 readings
• Maximum Hardness of The Measured Work Piece: 940HV (for D,DC,DL,D+15,C impact device)
• Radius of Rurvature of The Measured Work: Rmin=50mm (If using Alien supporting ring, Rmin=10mm)
• Recognition Function: Recognize the type of the impact device automatically
• Type of The Printer: Embedded thermal printers
• Communication: Blue & Mini-USB interface, virtual serial port protocol, support online measurement, host software upgradable
• Power Supply: rechargeable lithium ion battery of 3.7v, 2200mAh
• Charging Mode: USB charging
• Shape Size: 178mm * 87mm * 40mm
• Weight: 320g
PD-H5 Portable Leeb Hardness Tester
Parameters:
• Test Precision: ±6HL, ±1HRC, ±4HB
• Upper / Lower Limits Setting: 170~960HLD
• Screen Display: 128*64 dot matrix LCD, backlight and adjustable contrast
• Measuring Direction: 360° (down, inclined down, level,inclined up and up)
• Data Memory: 200*32 readings
• Maximum Hardness of The Measured Work Piece: 940HV (for D,DC,DL,D+15,C impact device)
• Radius of Rurvature of The Measured Work: Rmin=50mm (If using Alien supporting ring, Rmin=10mm)
• Recognition Function: Recognize the type of the impact device automatically
• Communication: Mini-USB interface, virtual serial port protocol, support online measurement, host software upgradable
• Power Supply: 3 * AAA alkaline batteries
• Shape Size: 150mm * 70mm * 30mm
• Material: ABS and PC alloy
• Weight: 180g
MH320 Portable Hardness Tester
Specifications
• Measuring range:HLD(170~960)HLD
• Measuring direction:360°
• Hardness Scale:HL、HB、HRB、HRC、HRA、HV、HS
• Display:dot matrix LCD,128×64 dots
• Data memory: 500 groups max.(relative to impact times 32~1)
• Printing paper: width is (57.5±0.5)mm, diameter is 30mm
• Battery pack: 6V NI-MH
• Battery charger: 9V/500mA
• Continuous working period:about 150 hours(With backlight off, no printing)
• Communication interface:USB1.1
• Outline dimensions:212mm×80mm×32mm
MH310 Portable Hardness Tester
Specifications
• Error and repeatability of displayed value:
No. | Type of impact device | Hardness value of Leeb standard hardness block | Error of displayed value | Repeatability |
1 | D | 760±30HLD 530±40HLD | ±6 HLD ±10 HLD | 6 HLD 10 HLD |
2 | DC | 760±30HLDC 530±40HLDC | ±6 HLDC ±10 HLDC | 6 HLD 10 HLD |
3 | DL | 878±30HLDL 736±40HLDL | ±12 HLDL | 12 HLDL |
4 | D+15 | 766±30HLD+15 544±40HLD+15 | ±12 HLD+15 | 12 HLD+15 |
5 | G | 590±40HLG 500±40HLG | ±12 HLG | 12 HLG |
6 | E | 725±30HLE 508±40HLE | ±12 HLE | 12 HLE |
7 | C | 822±30HLC 590±40HLC | ±12 HLC | 12 HLC |
• Measuring range:HLD(170~960)HLD
• Measuring direction:0°~360°
• Hardness Scale:HL、HB、HRB、HRC、HRA、HV、HS
• Display:segment LCD
• Data memory:100 groups max.(relative to impact times 32~1)
• Printing paper: width is (57.5±0.5)mm, diameter is 30mm.
• Battery pack: 6V NI-MH
• Battery charger: 9V/500mA
• Continuous working period:about 150 hours(With backlight off, no printing)
• Communication interface:USB1.1
• Outline dimensions:212mm×80mm×32mm